Jump to Category

Stock, Semi-Custom or Custom Cabinets: What’s best for a new kitchen

Stock, Semi-Custom or Custom Cabinets: What’s best for a new kitchen

The first thing to know when noting differences between stock, semi-custom, and custom cabinets is that the terms refer to the type of production methods used to make the cabinets, and not to the quality of the cabinets.

Stock cabinets are manufactured in large quantities and available on-demand at retail stores. Semi-custom and custom cabinets refer to more nimble manufacturing processes, in which you pay a little more for the option to have customization and upgrades.

Custom cabinets are built by a craftsman or small company, often locally, and made-to-order. Semi-custom cabinetry, as all cabinets offered by Cabinets ASAP, falls somewhere in between: when a cabinet maker has both custom capabilities and less expensive pieces that have been mass-produced. There are benefits and downfalls to each kind, so taking a few moments to learn about how cabinets are made is well worth it.

Style is likely the main factor impacting your cabinet order. Frameless styles are increasingly popular, but if you’re trying to match a cabinet style in your older home, you may need to find a custom or semi-custom maker.

With more flexibility and options, semi-custom cabinets offer you choices in sizing and design not available with stock cabinets. For example, you may be able to alter the width, height, or depth of your cabinets in 1″ increments, something that cannot be done using stock cabinets. Face frames, doors, and drawer heads are typically solid wood. Drawers are usually made from solid maple, joined with dovetail joints. Delivery times, though not as quick as stock cabinets, are shorter than custom cabinets, allowing faster completion of your home improvement project. Semi-custom cabinets were utilized in the kitchen remodel shown below.

Remodeling can mean odd measurements and strict layouts that will require at least a few custom cabinet sizes to reach the desired look. A custom cabinet maker will be able to closely match your selection for decades to come, and provide you with touch-up kits that can come in handy when you get that first ding. If you’re looking for something standard and modern, a stock cabinet may suffice—especially if you’re changing the layout or starting from scratch.

Quality is also a factor in your selection. Boxes, which are the bones of cabinets, are the components on which the hinges, doors (also called “fronts”) and countertops are installed. Think about all the closing, opening and knocking your cabinets will have to endure over the years. The materials and their subsequent durability are important.

Plywood — made of sheets of solid wood — holds up the best over time. Stock cabinets are often made with particleboard or fiberboard, which are composites made of wood chips and resin that can be toxic — namely, the formaldehyde, considered a “probable human carcinogen” by the EPA may have short- and long-term adverse health effects. Particleboard and MDF doors will also buckle and bulge more quickly when they encounter water. Plywood simply handles moisture better, which is why it’s a little more expensive, and it’s worthy..

Custom and semi-custom cabinets will give you greater options when it comes to other eco-friendly and non-toxic materials, too, (All Cabinets ASAP products are KCMA certified) including wood species, milling locations, paints and finishes. Many local suppliers use Pacific Northwest trees to mill their cabinets within the state of Washington. This means less of an environmental impact from CO2 emissions during travel, plus you’ll be supporting your local region.

Now for the comparison: cost. Stock cabinets cost much less than any custom or semi-custom order. A rough estimate put the materials (not including labor) at half the cost. When custom cabinets for an average kitchen can cost $15,000 to $20,000, and up, the decision might simply come down to money. Even for a tiny kitchen remodel, stock could save you thousands.

Though, the age-old adage “time is money” holds true for cabinets, too. Economies of scale make some stock cabinets significantly cheaper, but they may not come assembled. Cabinet orders that arrive in individual pieces will take more time to assemble, whether it’s yours or the time the contractor is billing you for. Alternately, custom cabinets arrive assembled.

That is the big advantage of semi custom-cabinets, like the ones we offer at Cabinets ASAP, you get the best of both world. You still have some decision poder on the design of your cabinets as in custom ones, and you don’t have to assemble them, as they comes ready to assembly and best of all, their price is low in comparison with full custom cabinets, making them really affordable to any budget.

There are many factors to consider when choosing the right cabinets for your home, family and budget during a kitchen remodel, so be sure to think about your space and what’s most important to you.

Share this post

Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)